No germination method is perfect (some seeds just won't germinate), but I've gotten 100% germination ever since I started using this method. The best Marijuana Seeds selection, from the finest sativas until the most medicinal Indicas, discover them in Delicious Seeds. Germinate refers to the process in which the plant begins to grow from seeds. Using the paper towel method offers an easy and effective method.
How to Germinate Seeds via Paper Towel Method
Cannabis seeds are natural things and you can’t expect 100% germination every time. Unfortunately, that’s just not how nature works. Many factors can affect germination including genetics (some strains germinate easier than others), the age of seeds, and how well they were stored. But I’ve been lucky and gotten 100% germination ever since I started using this method.
Paper Towel Method – Germinate seeds between wet paper towels, lock in the moisture with two plates, and place on a seedling heat mat for a few days
- High Germination Rate – Almost every seed with germinate if you follow the instructions
- Fast – Often takes only 1-3 days to see roots
- Keep Track – You can check on seeds without disturbing them
- Less Space – Use less space than planting seeds in pots (helpful if germinating lots of seeds at once)
- Fun – I personally love seeing the whole germination process and it makes me genuinely feel closer to the seedlings
- Multiple Steps – Not as simple as planting seeds directly in soil!
- Requires Supplies – You need cheap paper towels, seedling plugs, and a seedling heat mat
- “Bucket Head” Seedlings – I’ve found that shells are more likely to get stuck on the seedling leaves with this germination method because seedlings aren’t pushing themselves out of the soil. You may want to use tweezers to remove the shell gently, or just leave them be. However, this can happen with any method (instructions at the end of the article explain how to remove stubborn shells safely) and I personally find the increased germination rate makes this worth it.
Seeds typically germinate in 1-3 days!
Create happy little seedlings in less than a week!
How to Germinate via the Paper Towel Method
- Cheap paper towels – Why cheap paper towels? Seed roots grow into expensive cloth-like ones and have to be cut out (learned that one from experience)
- Two Plates – You need to lock the moisture in during the germination process
- Cannabis Seeds – If you need seeds, here’s a list of seed vendors that ship worldwide
- Rapid Rooters with Tray – The perfect environment for newly germinated seeds
- Seedling Heating Mat – Or any warm surface that stays about 70-85°F (20-30°C) to keep seeds warm
Cheap paper towels (don’t use the expensive cloth-like ones!)
Rapid Rooters (note: extra Rapid Rooters can be stored in a cool place for future grows)
Seedling Tray to hold Rapid Rooters
Seedling heat mat to keep seedlings warm (or any surface that’s about 70-85°F or 20-30°C)
1.) Put 3-4 Layers of Paper Towels on Plate
You don’t want to load your plate up with tons of paper towels, but it’s nice to have several sheets so they can hold plenty of water. If necessary, fold or cut the paper towels to size so everything fits completely inside the plate. If a paper towel is sticking outside the plates, everything will dry out quickly.
You may need to cut (or fold) paper towels so they fit completely inside plate
2.) Label the Strains
If growing more than one strain at a time, label the paper towels so you’ll know which seed is which.
3.) Add Water & Seeds
Add some water on top of the paper towels so they’re soaked through, then place seeds down. I add water first to avoid accidentally moving seeds. It’s also a good idea to keep the plate flat so seeds don’t roll around.
4.) Cover with 1 Sheet of Paper Towel
Put a single sheet of paper towel on top. With just one sheet you will be able to see whether the seeds have germinated without having to disturb them. You may need to add a little extra water so that the top sheet is moist all the way through.
With a single sheet on top, you can still mostly see the seeds
5.) Put 2nd Plate on Top
Lock in all the moisture by putting another plate on top.
6.) Place on Seedling Heat Mat
Plug in your seedling heat mat. It should warm up quickly. I’ve put the plates directly on the mat before, which worked well, but sometimes I worry my little weed seedlings may get too hot with the plate directly on the mat. Since I already have a Rapid Rooter tray for later, I place it between the mat and the plate. Feel free to use something else like a book or towel. The basic idea is to put some space between the heating mat and the plate so the plate still gets warm but the extra air space keeps the heat nice and even.
Why a seedling heat mat? Seeds germinate significantly faster when they’re kept 70-85°F (20-30°C). A seedling heat mat keeps seeds warm during the germination process. However, any warm spot works just as well (for example, on top of the refrigerator is the perfect temperature for some people). When you touch the wet paper towels, they should feel warm but not burning hot.
7.) Check on Seeds at Least Once a Day
Ensure paper towels don’t dry out. You may have to add more water occasionally to keep them wet. You can usually tell when the seeds have germinated without looking under the top sheet. This means you can check on your seeds regularly without disturbing them by picking up the top plate.
Seeds typically sprout in 1-3 days. Certain strains and older seeds may take a few extra days.
8.) Put Germinated Seeds in Rapid Rooters
Once seeds have germinated, gently pull off the top paper towel to reveal the seedlings underneath.
Carefully and slowly remove top paper towel sheet
Did you know the first two round seedling leaves were already fully formed inside the shell? The germination process only releases them. New leaves are yellow at first but turn green once they start getting light.
At this point, you may see some seedling leaves have already broken free of their shells. That’s awesome. These seedlings often grow the fastest.
If there’s a short root or seedling hasn’t germinated yet, put the paper towel back and gave the seedling one more day. Seedlings grow faster if they have a bit more root before being planted.
This Critical Purple Kush seed took an extra day to germinate compared to the other seeds. I gave it one more day after this so the root could get longer before I put in a Rapid Rooter.
I recommend cutting your Rapid Rooters in half to make it easier to place germinated seeds. Even a seed with a long wiggly root will usually easily fit into the “crack” of the Rapid Rooter. This prevents you from bending the roots.
Cut Rapid Rooters in half to make it easier to insert germinated seeds
Try to place the seed head close to the top so they don’t have far to go. I’ve found that some seedlings don’t make it to the top if you put them too far down.
If the seedling has already lost the shell, place the leaves close to the top. These seedlings often grow the fastest.
Otherwise, add the seedling, root down, with the shell close to the surface
Gently close around the seedling
Put into the Rapid Rooter tray (make sure they’re moist all the way through!) The bottom shell of the tray will hold extra water so plugs don’t dry out.
Add enough water that all the Rapid Rooters appear dark, but not shiny from too much water. Once you’re done, put the trays back on the seedling mat. Young seedlings love warmth!
9.) You Have Seedlings!
The leaves should appear above the Rapid Rooters within a day or two.
Just 12 hours later, several seedlings have already appeared above ground.
At this point, the seedlings are ready to be put under a gentle light. A sunny window works well, though your regular vegetative grow light should be fine as long as you keep it twice the normal distance away. Avoid touching the seedlings if possible. This is when they’re most vulnerable.
Within a day or two under a light (or in a sunny window), you’ll have a bunch of happy seedings!
The seedlings are ready to go in plant containers once they’ve spread out their first set of serrated leaves (to about the width of the Rapid Rooter)
At this point, you can plant the whole Rapid Rooter. Don’t forget to label the strains!
Move the grow light down to the standard distance once the plants have 3 sets of leaves. By now they should be growing fast!
Note: Move grow light down early if seedlings start getting tall with long stems. Tall, stretchy seedlings are telling you they want more light.
What If the Seedling Shell Gets Stuck? (“Bucket Head” Seedlings)
One downside to this method is sometimes a seed shell will get stuck on the seedling. Here’s how to deal with that.
Helpful Tool: Pointy tweezers (though most tweezers will work in a pinch)
Sometimes leaves get stuck in the shell. Here’s what to do.
First, give the seedling 24-48 hours to see if it pushes the shell off on its own. Many seedlings just need a little extra time and don’t need your help.
Ignore stuck shells if the leaves are already free. The shell will fall off on its own.
If you don’t see any progress and leaves still seem trapped after a day or two, you may need to remove the shell to release the leaves contained inside. If leaves can’t break free and see the light, the seedling may die.
Close tweezers so they are as narrow as possible and put inside the crack. Then slowly allow tweezers to open, which will gently pry the shell apart.
I used to use my fingers to remove shells but it can be hard not to disturb the seedling. Then I learned that a pair of pointy tweezers can be inserted into the crack and allowed to gently open to pry the seed apart. Don’t tug or use any force whatsoever. Just gently and slowly release the leaves. The leaves may be stuck to the shell at first and it can take several seconds of gentle tugging for the leaves to slowly loosen and pull away from the shell. If you’re having trouble, add some water to the stuck part and wait a few minutes to help soften it up.
If the seedling leaves aren’t opening up because they’re stuck inside the seed membrane, wet the membrane and give it a few minutes soften up. Then use tweezers to gently remove the membrane. In some cases, it’s easier to stick the tweezers inside and pry the leaves apart just like with a shell.
If leaves are stuck inside the shell membrane for more than a day or two, do this: Wet the membrane, wait a few minutes, then use tweezers to gently pry it away from leaves.
Once you can see the two individual leaves are separated, you’re good to go!
How to germinate with the paper towel method
Daily we reveive the questions like “what is the best way to germinate” or “how do I start germinating”, We know this is for lots of people not an easy thing said…. So we tought to make it as a subject in the next weeks
First of all we want to say there are really a lot of ways to germinate seeds and each one definitely has his/her best way for a 100% succeed …
Germinating with Kitchen paper and tupper
This is a pretty easy way to do it, you only need a vacuum closeable tupper or what you can find in the kitchen to keep things vacuum, then you take the kitchen paper and you fill the bottom of the tupper with a layer of the paper, then you spray the layer with water from around 23 degrees Celcius until it is wet but not soaken wet .Then you take the seeds and put them slowly and careful on the wet layer with each a good distance between the seeds so they can´t get strangled .then you put another layer of kitchen paper above the seeds so they all are covered and then you also spray this layer wet, but again not to wet (this all to avoid rotten or mold) .You close the tupper and you put it in a total dark place with a temperature around 21 to 24 degrees Celcius.In around 36 to 72 hours you will see the seeds are popped and they can go in to soil for further rooting and growth .
Under here we show you a video tutorial how to do it .
Thanks for watching and if you doubt about something or you have questions don´t hazer to contact us
Germinate Seeds With the Paper Towel Method – How to Guide
Check out our beginner grower’s guide to learn how to germinate seeds with the paper towel method. Every cannabis plant starts off as a tiny seed with the potential to grow huge yields and bountiful buds. If you want to start your garden on the right foot, the germination phase is critical to its future growth.
What Is Germination?
Germination refers to the process in which the plant begins to grow from a seed. As the first stage of the growth cycle, germinating a seed requires a grower to create the perfect environment to get those seeds to break open and pop with a fresh and vigorous growth.
So, what is needed to get these seeds popping?
A seed requires plenty of moisture to absorb, increase in size, and gradually break out of the shell. You know you’ve done the germination process right when a seedling emerges from the hard seed shell. This growth will be the basis of the roots and the part of the seedling that absorbs nutrients from the growing medium.
Starting off with a high-quality seed is critical. Avoid seeds that feel fresh and soft and look green. Mature seeds have a hard outer shell. However, they can get too old and mishandled and won’t sprout as effectively. Before you get to the germination phase, it’s important to store your seeds in a dark, dry, and cool space.
What Is the Paper Towel Method?
For seed germination, the paper towel method is one of the easiest and most effective ways to get your cannabis seeds to pop. Essentially, you’re germinating seeds between two damp paper towels and a couple of plates, which are used to create a contained and dark environment for a few days. During this time, the seeds will begin to sprout, if done correctly.