Do Feminized Cannabis Seeds Make Hermies?
What Are Feminized Cannabis Seeds? These seeds all grow up to be female plants. That means every plant produces buds. With “regular” or unfeminized seeds, about half the plants will turn out to be male, which don’t produce buds. They can also pollinate your female plants (causing seedy buds). Therefore most growers will remove male plants from the grow room as soon as they’re identified. Learn more about male vs female plants. Feminized seeds let you plan your grow more effectively because you don’t have to throw half the plants away once they start flowering.
Every plant grown from feminized seeds will produce the buds we know and love. This plant was grown from feminized Swiss Cheese seeds.
What Are Hermies? “Hermie” is short for “hermaphrodite.” Hermie cannabis plants usually look like normal female plants for the most part, but they also grow some male parts that produce pollen. This causes seedy buds just like pollen from male plants. Hermies are to be avoided! Read the full tutorial on hermies.
It’s no good if your “female” plants start growing male flowers or parts of male flowers. That can cause seedy buds just like a male plant!
This bud got completely seeded due to a hermie in the grow space. Notice the lumpy round bits. Those are seeds forming.
What’s the matter with a few seeds?
Cannabis growers are trying to grow sinsemilla (seedless buds). A few seeds won’t hurt anything. But if you have very seedy buds, it significantly lowers your yields because plants are putting all their energy into making seeds. The buds also tend to be less potent if they are full of seeds. Seeds are not the end of the world, but it’s good to avoid if possible.
“Sinsemilla” means “no seeds.” Sinsemilla is the highest quality and most potent of all buds
Since most growers are trying to grow sinsemilla, having only 100% female plants in the flowering grow room is crucial to prevent pollination.
Feminized cannabis seeds can be a blessing for small-scale growers. While male plants produce pollen sacs, feminized seeds ensure all your plants will end up being bud-bearing females (instead of growing half male and half female plants like with regular seeds).
If you don’t have room for extra plants, feminized seeds can make planning your grow a lot easier!
Good feminized seeds should produce only 100% female plants, with no hermies or male plants. So starting with feminized cannabis seeds lets you make the most efficient use of your grow space. You don’t have to worry about identifying male plants and throwing them away before they pollinate your female plants. With good feminized seeds, you know that if you’re growing 10 plants, all 10 of them will make buds, and that makes it easier to plan out your grow ahead of time.
With all these bonuses, why would any small-scale grower use any other type of seeds?
Pros of Feminized Cannabis Seeds
All plants produce buds
You don’t have to throw away half your plants after nurturing them for weeks
You don’t have to worry about your buds getting pollinated, causing seedy buds, reduced bud quality and lower yields
But is there a dark side to feminized cannabis seeds?
One of the biggest worries growers have about feminized seeds is that they will produce hermies instead of 100% female plants as advertised.
This hermie is growing both male and female flowers. Can this be caused by feminized seeds?
Unfortunately, hermies can be a lot easier to miss than a male plant since it may just be a small part of the plant that’s affected. A male plant makes itself known at the beginning of the flowering stage, but a hermie plant may grow only buds except for just one or two tiny pollen sacs. A few yellow hermie bananas hidden in the buds can also produce pollen. Any type of male flower part that grows in your garden can add seeds to your buds, and hermies are some of the worst offenders.
This grower didn’t notice that the buds had been seeded until harvest. As he was trimming, he noticed seeds popping out. Since there were no male plants, chances are this was caused by an unnoticed hermie somewhere in the grow space.
Is it True that Feminized Seeds Sometimes Cause Hermies? Yes!
Many growers believe that feminized seeds can cause hermies, and there is some truth to that. In order to create a feminized seed, one of the parent female plants had to be forced in some way to produce pollen.
That pollen is used to pollinate another female plant, and the offspring of those two plants will all be female since both of the parents were female. That’s how you get feminized cannabis seeds. But that also means every time you have a feminized seed, that seed had a plant that produced male flowers in its recent genetic history.
There are different ways to feminize seeds, but only some methods produce seeds that turn hermie on you.
It’s important to understand that hermies can happen a couple of different ways. And the different types of hermies affect what genes are being passed on to the seeds.
This swollen calyx has a seed developing inside
What Causes Hermies?
Hermies can be caused by many things, including…
bad genetics – the plant comes from a line of plants that naturally create hermies for no reason, even in good growing conditions
high stress – high temperatures, light leaks, inconsistent light schedules, as well as other types of major stress can cause a healthy plant to hermie, though some plants/strains are more susceptible than others
letting buds over-mature – this is also known as “rodelization;” basically when the plant’s buds have gone past maturity without being pollinated (if the grower waits way too long to harvest), a female plant may make male pollen within its buds as a last ditch effort to pollinate itself and make seeds for the next generation
chemical stimulation – by exposing a female plant to certain substances like colloidal silver or gibberellic acid during the early parts of the flowering stage, you can force any female plant to create pollen. This is how seedbanks get female pollen to produce feminized seeds.
Seeds created from “female” pollen will turn out being female (or at least as female as the parents).
The pollen from a hermie plant makes feminized seeds
The pollen sacs on this masculinized female plant have opened and pollen has spilled onto the leaf below
Another type of hermie: a yellow “banana” can appear in your buds and make pollen. This male flower part would normally be inside a pollen sac. When it’s in the open like this, it becomes a little pollen generator.
Feminized seeds are susceptible to becoming hermies themselves when exposed to the same conditions as their female “father” who produced the pollen. But since any plant can be chemically induced to produce pollen, it doesn’t mean that the ability to hermie in a natural environment is passed on to the seeds.
So only some feminized seeds come from parents with bad genetics, and that’s what’s the grower cares about most.
The bagseed gamble… When you find seeds in your buds, that usually means that the buds were pollinated by accident. Seeds that were accidentally created are suspect. It could be that a stray male plant caused them, which means there were no hermies and you will get about half male and half female plants. But accidental seeds could also be the result of herming by an indiscriminate grower, and that means you have feminized seeds, sort of. Some of them may produce pollen on you just like their parents. Growing with bagseed is a big gamble… you never know what you’re going to get.
Are your cannabis bagseeds viable? Viable, good seeds usually appear either dark and striped or solid gray/beige.
If a seed is pure white it usually means it’s underdeveloped and won’t sprout. But it can sometimes be hard to tell. In the end, if a seed sprouts and grows it’s a viable seed! I’ve had very pale, flimsy seeds sprout into gorgeous fast-growing plants, so if you’re not sure the best thing to do is try to germinate it!
Seed Banks & Breeders
Commercial breeders and seed banks use chemical stimulation to create feminized seeds. What that means is they put specific compounds on developing female plants to force them to produce pollen. You can actually do this yourself at home.
This technique works on nearly any female plant, including plants that would never hermie naturally. So it can be used to take two plants with great genetics to produce female seeds. But the same process will also work incredibly well on plants that do hermie easily all on their own. That means it’s up to the breeder to test and make sure that they have a solid plant with unbeatable genetics before using the feminization technique.
The pollen that results from chemical stimulation is used to pollinate another female plant and make feminized seeds. If the parent plants would never hermie without chemical stimulation, then you have created feminized seeds that won’t ever make pollen in your grow room.
But if one of the parent plants was chosen because it does hermie easily, you’ll end up with seeds that likely will herm. The breeder might not have done any testing on the parents or the resulting offspring to even know.
Without testing, a breeder can’t tell whether they’ve created quality feminized seeds
Choosing the Right Cannabis Breeder
Unfortunately, some cannabis seed breeders are more trustworthy than others. The great ones have created stabilized strains that have been bred over several generations to produce a consistent product without any problems with plant sex.
Less scrupulous breeders might breed two random female plants together and sell the resulting seeds as a new strain without any testing. In this second case, you don’t know what to expect, and neither does the breeder.
If the breeder hasn’t tested their strains extensively in many situations, they won’t know whether their seeds tend to hermie or not. If they have carelessly bred plants that have a tendency to herm, then it’s really likely that at least some of the resulting seeds will have the same problem.
Breeder choice is important!
I have to admit I may be biased towards feminized seeds. I’ve grown almost exclusively with feminized seeds over the last decade. It has made my life so much easier! I only purchase seeds from breeders that I trust and all the resulting seeds have been bud-bearing females. I haven’t had any real problems with hermies.
On the flip side, I’ve heard of growers buying feminized seeds from untrustworthy breeders and having a big portion of their seeds turn male or become hermies even in perfect growing conditions. So there is truth to the fact that you can run into hermie problems with feminized seeds.
Yet there are good and bad breeders out there, and with good breeders, you have a very low chance of running into cannabis sex problems.
So if you do choose to purchase feminized seeds (or any seeds really), please make sure you get them from a trusted breeder!
Conclusion: Feminized seeds from a trustworthy breeder have a low chance of producing hermies, but the odds are much worse with feminized seeds from an untrustworthy source
The truth is it takes a hermie of some sort to create feminized seeds. That means that you always run the risk of running into hermies when growing feminized seeds… yet that is true for non-feminized cannabis seeds, too! Lots of regular seeds produce hermies.
What’s most important, whether you get feminized seeds or not, is to get your seeds from a breeder who has a reputation for producing quality genetics. That is the best thing you can do for any strain to ensure a smooth grow. With a great breeder, you have a very low risk of running into any sex or gender problems.
I personally prefer feminized seeds, and that’s the only type of seed I grow. It makes it easier for me in my limited grow space. I haven’t run into any significant problems with hermies, so I’m satisfied with growing only bud-bearing plants.
Yet a lot of growers grow with regular seeds because they’re easier to breed and produce at home. Many growers have created a system for weeding out male plants that is more convenient for them than using feminized seeds.
In the end, when it comes to feminized cannabis seeds you need to decide whether the small chance for hermies is worth the convenience of all-female plants. It’s up to you to figure out what’s best for your needs!
"Hermie" cannabis plants can look like normal female plants at first glance, but they produce pollen that causes seedy buds. Hermies are to be avoided!"
How to Make Feminized Seeds at Home
by Nebula Haze (originally inspired in part by this thread from PhenoMenal)
Table of Contents
5 Steps to Feminized Seeds – Learn how to force female plants to make pollen and create feminized seeds
Introduction to Feminizing Your Own Cannabis Seeds
First of all, what are “feminized” marijuana seeds? Feminized seeds are seeds which have been created by breeding two female plants together. Because there are no male parents, all the resulting seeds end up being bud-bearing female plants. With feminized seeds, you know you can always count on every plant to produce buds, and don’t have to worry about removing male plants (which cause lower yields and seedy buds if they’re left among your female plants). Learn more about male vs female cannabis plants.
Feminized seeds come from two female plants being bred together, causing all offspring to be female
Feminized seeds are commonly available from seed banks for nearly every popular or famous strain. Breeders understand that a lot of people just want to grow plants for buds, and don’t care about making a robust breeding program (which is one of the main reasons growers want male plants).
So how do seed banks feminize their seeds? How can you breed two female plants together?
The main idea is to force a female plant to produce pollen sacs like a male plant. These male flowers (growing on a female plant) create pollen, which can be harvested and used to pollinate another female cannabis plant. The resulting seeds will all end up being female. Can feminizing seeds cause hermaphrodite plants?
Growers can force a female plant to make pollen sacs, and the “feminized” pollen produced can be used to fertilize another female plant
How do you force a female plant to make pollen?
There are two main ways to make feminized pollen:
- Induce feminized pollen chemically (Recommended) – This is the “professional way” to feminize seeds, and is how most reputable seed banks and breeders create feminized seeds to sell to the public. Substances such as colloidal silver and gibberellic acid are used because they cause a female plant to produce male pollen sacs if bud sites are drenched daily for the first 3-4 weeks after the switch to 12/12. This article will give you step-by-step instructions on how to feminize cannabis seeds using this method.
- Rhodelization (Not Recommended!) – In the wild, some female cannabis plants will naturally start making male pollen sacs or “bananas” which can self-pollinate the plant. This happens if the plant is stressed, or if the plant is not harvested in time and buds start to die of old age. The plant is basically doing everything it can to save the next generation. This method is “natural” and these seeds will all end up being mostly female, but the problem is you’re selecting for plants that naturally hermie (grow both male and female sex organs) without any chemical induction. This means the resulting seeds are much more likely to turn hermie in natural conditions too. That’s a problem if you don’t want seedy buds every time you harvest. For that reason, it’s highly recommended you don’t feminize seeds this way, and it’s a good idea to toss any and all seeds that are the result of natural herming.
Read this article for more in-depth discussion about the pros and cons of each method, and how to avoid hermaphrodite plants when producing your own feminized seeds.
Overview: How to Make Feminized Seeds
1.) Buy or Make Colloidal Silver – The article below will teach you how to make colloidal silver at home, as well as show you where to buy it if you don’t want to make it (it’s actually pretty cheap!). It’s basically a solution of silver suspended in water and is available online and in health stores as a dietary supplement.
What about gibberellic acid? I’ve seen with my own eyes that the colloidal silver method works for making feminized seeds, but I don’t personally know anyone who has tried making feminized seeds with gibberellic acid. From what I understand it can be used exactly the same way as colloidal silver to induce female plants to produce pollen, but I’m not sure exactly how to prepare a gibberellic acid solution that works consistently.
2.) Spray the bud sites of your known female plant daily during first 3-4 weeks of the flowering stage (until pollen sacs form and start splitting open) – After switching to a 12/12 light schedule, choose bud sites on your known female plant, and spray/drench them daily with colloidal silver (or gibberellic acid). As the treated flowers develop, they will form into male pollen sacs. Untreated bud sites on the plant will form into female buds as usual; however, these buds are unsafe to smoke unless you’ve been very careful to make sure they didn’t come into contact with colloidal silver or gibberellic acid during the feminization process.
3.) Harvest “Feminized” Pollen – When pollen sacs are ready to be harvested they swell like a balloon and start to open up. Make sure not to harvest early and also make sure to keep spraying the bud sites daily until this point or you might end up with empty pollen sacs! When the pollen sacs are ready, the leaf section protecting the pollen will start to crack. At this point, it’s time to collect the feminized pollen. One of the easiest ways to do this is to collect the pollen sacs directly and let them dry for a week. At that point, they can be placed in a bag and shaken to easily collect all the pollen.
4.) Pollinate Another Female Plant – At this point, take the feminized pollen you’ve collected and use it to pollinate a female plant that has been flowering for about 2-3 weeks (full detailed instructions with a video on how to do this below). Although it’s possible to pollinate the same plant as the original, it’s not recommended in part because the timing doesn’t match up (attempting to pollinate buds too late in the flowering stage leads to reduced seed production). It’s best to pollinate a different female plant that you started budding a few weeks after the original. This increases the number of seeds produced as well as gives the new female plant enough time to develop them to maturity. It also increases genetic diversity compared to self-pollination.
6 Weeks to Harvest Seeds – After about 6 weeks from pollination, the calyxes on the buds of your female plant will be swollen and fat. You know it’s time to harvest your seeds when they start bursting out. At this point, it’s time to congratulate yourself because you’ve got feminized seeds!
Now that you’ve gotten the overview, here’s the feminization process with detailed step-by-step instructions…
Step-By-Step Instructions (with pics!)
1.) Buy or Make Colloidal Silver (or Gibberellic Acid)
Where to get Colloidal Silver (your options):
Note: You can purchase gibberellic acid online (a gibberellic acid solution can be used the same way as colloidal silver for feminizing seeds). However, I do not have experience with the gibberellic acid method and don’t know the best way to prepare the solution.
2.) Spray the bud sites of your known female plant daily during first 3-4 weeks of the flowering stage (until pollen sacs form and start splitting open)
When you’re ready, change to a 12/12 light schedule in order to initiate flower formation. For photoperiod plants, wait until your plant is 5-6 weeks old before initiating the flowering stage. Some young plants seem to have trouble (and take much longer) to go through the feminization process, and their pollen may not be as fertile, so start with a more mature plant.
As soon as you change the light schedule (and maybe even a day or two before) start spraying your plants thoroughly with colloidal silver at every bud site you want to form into pollen sacs.
Spray bud sites thoroughly, drenching them with colloidal silver every single day
The above pic shows you where pollen sacs form on the plant (same places female buds form)
Important! Keep spraying daily until pollen sacs open up. Don’t stop spraying early, even if pollen sacs appear to be already formed, otherwise they may not produce much pollen!
A one-hand pressure sprayer / mister is really helpful for spraying bud sites evenly and thoroughly
You can choose to treat a single bud site or all the bud sites on the plant. Any untreated bud sites will develop into female buds as usual. If you want to smoke these buds, it’s incredibly important to avoid letting them come into contact with colloidal silver as that’s not safe to smoke. (Don’t worry, feminized seeds don’t contain any silver). I highly recommend letting the whole plant be your test subject so you don’t have to worry about that 🙂
Note: If you’re feminizing an auto-flowering plant, start spraying daily when the plant is about 20 days old from seed. This is when most auto-flowering cannabis strains start making flowers.
3.) Harvest Your Feminized Pollen
When pollen sacs are starting to crack and look like they’re about to open up (or if you can see one has already opened) then your pollen is ready for harvest!
When pollen sacs are cracking and opening up, you’re ready to harvest your pollen!
Pollen spilling onto a nearby leaf
One way to harvest your pollen is to gently and carefully remove all the pollen sacs. Let them dry for a week, and then put them in a resealable bag. If you shake the bag the pollen should easily spill out. You may need to cut a few open yourself.
How to Store Feminized Pollen: Moisture is your main enemy when storing pollen. It can help to double the mass of the pollen collected by adding regular cooking flour. This absorbs moisture during storage and as an added bonus, it will make application easier when you get to pollinating. If you triple-bag the pollen-flour mixture and stick it in the freezer (with a good nametag so you know where the pollen came from), your pollen can be stored for a year or longer.
4.) Pollinate Another Female Plant
When your chosen mother is 2-3 weeks into the flowering stage, take a paintbrush and ‘paint’ your feminized pollen on the developing bud sites you want to pollinate. Bud sites (for both male and female plants) are located wherever you can see leaves meet a stem.
Only the buds that come in contact with pollen will grow seeds. You can choose to pollinate all of your buds or just a few on the plant.
Make sure that you’re touching all the female pistils/hairs with your pollen. Here’s a little video showing you exactly what this looks like!
6 Weeks to Harvest Seeds
It usually takes about 6 weeks for your feminized seeds to fully develop. Some plants are literally dying right as the seeds become ready, so to get the most viable seeds, you need to try to keep it alive until the seeds actually start dropping. The seeds can be used right away, or stored in a cool, dry place for a few years. Don’t forget to label them with the date!
This seed is about to burst out of its calyx!
This is what it looks like when the seed is exposed
Picture Journal of Making Feminized Pollen with Colloidal Silver
This grower initiated the feminization process on a seedling that was only a few weeks old. As a result, the plant wasn’t able to get big enough to produce many pollen sacs. You will get even better results if you start with a plant that is at least 5 weeks old 🙂
October 18 – Plant right before the switch to 12/12
October 27 – After being drenched with colloidal silver daily for a little over a week
October 30 – Pollen sacs are forming
November 15 – Pollen sacs appear to be almost fully formed and are swelling in size, but haven’t opened up yet. Don’t stop spraying colloidal silver or you may end up with empty sacs!
November 27 – Pollen sacs are opening up! Collect the pollen before they’re all open!
FAQs – Frequently Asked Questions
How can I identify plant gender before the plant actually starts flowering? (Besides using feminized seeds)
There are a few ways to identify plant gender before the plant actually starts flowering, and each is helpful in different situations.
- Start with a clone – A clone is an exact copy of another plant. If the “mother” of the clone is a female plant, it means the clone is also female
- Look at preflowers (identify plants when they’re 3-6 weeks from seed) – If you know where to look, cannabis plants will actually reveal their gender in the vegetative stage when they’re just 3-6 weeks from seeds. Male plants usually show their gender by 3-4 weeks and female plants usually show their gender around week 4-6 from seed. Learn how to determine the gender in the veg stage by looking at preflowers.
- Test the leaves of your seedling – It’s possible to send in a leaf from a young cannabis plant to a specialized testing company, and they will be able to determine the gender as soon as 3 weeks from seed! Although I haven’t used any of these companies and can’t recommend any in particular, here’s a link to one example just so you can see what I’m talking about. From talking to other growers who use this method, it appears to be very accurate.
- Take a clone and force it to start flowering – if you take a clone from a vegetative plant, you can force that clone to start flowering and reveal its gender. You’ll know the gender of the “parent” plant by the gender expressed by the clone. In my opinion it’s better just to look at the pre-flowers since they’ll usually tell you sooner than if you use this method (in this case you have to wait for the seedling to get old enough to clone, then wait for the clone to make roots, then wait for the clone to start flowering – which usually takes weeks longer than the much easier pre-flower method).
- Look at the seed itself – Some growers swear by this method (if someone knows the author of this popular but anonymous picture that has been circulated on the internet since at least 2008, please let us know!). The idea is to look at the seed’s characteristics because to some extent, some seeds look “more female” than others. According to people who use this method, it’s better than random guessing but unfortunately in the best-case scenario, even the growers I’ve talked to who have experience using this method say it only has up to 70% accuracy. That means about 1/3 of “female” seeds end up being male. It also creates false negatives, which means that about 1/3 of the “male” seeds you’re throwing away are actually female. It’s better than 50/50 but when using this method; it’s not a way to ensure that all plants are going to be female. Personally, I do not recommend using this method as a way to identify gender. I believe all the other methods are much more accurate and depend less on needing experience!
Can I Make a Breeding Program Using Just Female Plants and Feminized Seeds?
Yes, it’s possible to use just female plants and feminized seeds for further breeding, with one major caveat.
Without careful and thorough testing, it may be possible to accidentally select for cannabis plants that tend to herm (make male flowers or pollen) and cause seedy buds when you don’t want them to.
For each possible “mother,” clones should be grown in several different environments and tested thoroughly to make sure that the mother plant does not have any tendency to make pollen naturally in normal or stressful conditions. It’s okay if plants grow pollen sacs if induced chemically since that is very unlikely to happen in someone’s garden on accident, but you don’t want plants that will start growing male parts on their own without chemical induction. Thorough testing of plant hardiness is always important when breeding, but it may be especially important when breeding feminized seeds together.
Are there other reasons I should avoid breeding seeds without males?
The most common reason growers say you shouldn’t do this is because it’s “unnatural” or doesn’t “seem right.” Some growers say you need male plants for genetic diversity. I’ve also heard growers say that the resulting plants will be weaker, sterile, less potent and once someone even told me that resulting plants “will be worse in every way.”
As of yet I haven’t seen any of these claims backed by actual personal experience, or any real-life examples showing why using feminized seeds is not a viable way to breed new strains.
To those who say this type of reproduction just doesn’t seem right, the evolutionary strategy of plants using only female and hermaphrodite plants to breed is actually pretty common and is known as gynodioecy. One example of a plant that only reproduces this way is a flower found in Canada and the US called Lobelia siphilitica, also known as the Great Lobelia. Obviously this reproduction method isn’t exactly the same as artificial feminization since the pollen production is caused naturally instead of induced chemically, but examples of gynodioecy show that a female flower-based breeding population can exist in the wild even when no plants are purely male.
The Great Lobelia naturally reproduces using only female and hermaphrodite plants. This is similar to the cannabis feminization process because it results in a population of plants that all primarily grow female flowers, with no pure male plants
When it comes to genetic diversity, the ability to cross out to thousands of different cannabis strains allows you to dramatically increase the gene pool without using male plants.
So those are my answers to the common objections of a feminized seed-based breeding program, however I am just a theory-crafter when it comes to this topic.
It certainly seems possible that a feminized-only breeding program could run into unforeseen problems down the road, but as far as I know there isn’t any evidence of that so far.
Although I have a few anecdotes from growers who have used only feminized seeds for a few generations, it would be much better to share information from someone who has conducted plenty of testing over several generations. We’d love to hear from you if you have bred more than a few generations using only feminized seeds and want to share your experience!
What are positive aspects of breeding two feminized seeds together?
Besides not having to worry about male plants in the next generation, the main advantage of doing this is you have a much better idea what you’re working with when it comes to producing the type of buds you’re looking for. When you’re growing a male plant, it has several genes it will pass to its offspring that has to do with how buds develop, but since it’s a male plant those genes aren’t expressed and it’s hard to figure out what they are.
Historically, the way to learn more about the “hidden genes” contained in a male plant is to breed it to several well-known female plants, and see how the offspring compare to each other. The genes that don’t come from the known mother plant are assumed to come from the male. Another way of going about this is to take several clones of the same well-known female plant, and breed them with many different male plants to see which ones produce the best offspring.
After testing with several pairings, you start to get an idea of the hidden genes a male plant has to offer to its female offspring. This time-consuming process of documenting and identifying good male plants is why proven stud male plants are one of the most valuable and closely guarded types of clones available today.
But the process of finding the right “father” is a little different when you start with two female plants. In this case you already know quite a bit about the genes of both parents because you can just look at and test the buds of both plants directly. This allows you to pinpoint desirable genes with less guessing and much less time spent growing out and cataloging plants!
Why even have male plants then?
In nature, male plants are very effective at increasing genetic diversity by ensuring cross pollination. With only purely male and purely female plants, every resulting seed will have two different parents.
Another big advantage in the wild of having separate female and male plants is sexual specialization. In other words, plants are able to evolve male and female traits separately, so each type of flower can become more specialized at its unique “job.”
However, this isn’t the only successful breeding strategy for plants. In fact, only 6-7% of plants have completely separate male and female plants like cannabis plants do (known as dioecious plants). Most plants grow some mix of male and female flowers on each plant, with different combinations offering different evolutionary benefits.
You might enjoy this scientific article if you want to learn more about the evolution of sex determination in plants and animals: Sex Determination: Why So Many Ways of Doing It?
And although most cannabis strains (at least the good ones) display either purely male or purely female flowers, there are some wild populations (and some strains of hemp) that regularly produce plants with male and female parts on the same plant.
When it comes to artificial selection for breeding new strains, the grower is in charge of cross pollination, so there’s no need for the plant to specialize in male parts. Pretty much the only thing most growers care about is how female flowers develop. So (unlike in nature) growers have the freedom to choose plants that improve female buds without even having to consider how it might affect male plants.
Can feminizing seeds result in hermaphrodite plants?
The answer is yes. If you do it the wrong way then feminization can lead to plants with an increased chance of herming. However, with a well-tested and well-bred feminization program, one of the main goals is to breed out any plants with hermaphroditic tendencies that show up under normal conditions. When you buy feminized seeds from trustworthy breeders, you can count on the fact that every plant will end up growing only female flowers and that’s it.
This is a relatively big topic with a lot of controversy so I wrote a whole article about it if you want to check it out!
Can I pollinate the same plant I collected the pollen from?
Yes, it’s possible. However, it’s not really recommended because for one, the timing doesn’t match up. By the time your pollen is ready to use, your original plant will already be several weeks past the optimum pollination point. It’s best to pollinate a female plant that has only been flowering about 2-3 weeks. It’s also possible to run into unwanted side effects from self-pollination/inbreeding.
One thing to keep in mind is even if you pollinate a plant to itself, the resulting seeds are likely not going to be exact copies of the original (unless the original plant is extremely inbred). The resulting seeds will be a mix of both the mother’s expressed genes and her hidden ones.
Ever wondered how those marijuana seed banks make feminized seeds? Learn how to create your own feminized seeds at home using two female plants!